Skip to main content
Products
Complete Cable Carrier System
By Industry
Case Studies
Contact Us
Get a Quote
Where To Buy
Library
Blog
Plastic Open Style
Hybrid Open Style
Covered Tube Style
3D Line
Steel
Accessories
Cables
Machine Tool
Cranes & Material Handling
Oil & Gas
Steel & Aluminium Processing
Factory Automation & General Manufacturing
Get a Quote
@
Get a Quote
If you already know the part you need, enter the part number and quantity needed.
Submit
If you aren't sure what product you're using, follow these easy steps to get the parts you need.
Step-by-Step Process
If you're starting a new project, let us help you select the right product for your needs.
Contact Us
Get a Quote
1
2
3
4
5
6
7
8
1. Bend Radius or KR
Get the center pin to center pin measurement. Divide that by two. This is your bend radius.
A Carrier bend radius is the center pin to center pin measurement divided by 2
mm
in
Next step
Skip to end
2. Carrier Measurements and Link Count
Figure A
Figure B
Figure C
Measure across the width of the widest part of the link (Figure A)
mm
in
Measure the height of the sideband (Figure B)
mm
in
Measure the length of one link (Figure C)
mm
in
Count the Links
Next step
Skip to end
3. Type of Crossbar
What type of crossbars/frame stays are on the current carrier? (Or click on the photos)
How do the cross bars open? (open to the inside diameter or outside diameter, non-opening or hinged)
You can also upload a photograph of the crossbar here
Next step
Skip to end
4. Type of Bracket
Nylon, Nylon with strain relief comb, Metal, Metal with strain relief comb, Universal (3 sided) (Or click on the photos)
You can also upload a photograph of the bracket here
Next step
Skip to end
5. Type of Dividers
Indicate the vertical dividers or horizontal shelves on the inside cavity of the carrier. (Or click on the photos)
If so, how many dividers per link?
Next step
Skip to end
6. Markings
Please provide any part numbers or markings you find on the current carrier links (both sides) and cross-bars
You can also upload a photograph of the markings here
Next step
Skip to end
7. Cable Details
We can also provide electrical cables if they are being replaced with the track. Please provide us with the following (if applicable):
Current part number on cable jacket
Cable gauge size (awg)
Conductor count
Length required
m
ft
Shielded or unshielded
shielded
unshielded
Jacket material
Additional cables
Next step
Skip to end
8. Summary
1
Bend Radius or KR
2
Carrier Outside Width (Bk)
Carrier Outside Height (hG)
Carrier Link Pitch
Count the Links
3
Type of Crossbar
4
Type of Bracket
5
Type of Dividers
6
Markings
7
Cable Details
Please review this summary to ensure your details are correct. To make any changes, simply click on a component to go to that step.
@
Submit
Are you sure you want to leave KabelSchlepp Canada's website?